SHOW-BOARD I

Multi Product - Show Board Application Note Multi-Product Show Board Application Note www.austriamicrosystems.com Revision 1.00 1-4 Multi Product - Show Board Application Note General Description Board Description Figure 1: Board Description Front Figure 2: Board Description Back austriamicrosystems Parts Description Label Name Description Info A B C D E F K AS1322 AS1531 AS1352 AS5043 AS1909 AS1101 AS1120 DC-DC Step-Up Converter 12-Bit, 8-Channel 300ksps ADC Programmable Quad LDO Rotary Encoder Supervisor Low Dropout LED Driver LCD Driver Click here for Datasheet / Product Info Click here for Datasheet / Product Info Click here for Datasheet / Product Info Click here for Datasheet / Product Info Click here for Datasheet / Product Info Click here for Datasheet / Product Info Click here for Datasheet / Product Info Menu Button Description Label Name G H ^ | v Description Info Rotary Encoder Battery Current Temperature Battery Voltage Backlighting Use this Button to increase or decrease the backlighting. Press and hold will in/decrease the light. Button press swaps between decrease increase backlight intensity. Cycle menu Backlight Others Label Name J L Description Info On/Off Switch Battery 1 5 2 6 3 Label Name 1 2 3 4 5 6 Ambient Light Level Blinks if Magnet removed Battery Level Menu Bars Rotary Direction Units 4 Figure 3: Display www.austriamicrosystems.com Revision 1.00 2-4 Multi Product - Show Board Application Note Figure 4: Schematic Operational sequence 1. Place a single AA Battery in the battery holder. 2. Turn on the Show-Board via the ON/OFF switch. 3. See Menu Button Description for the use of the menu. If there are questions do not hesitate to contact us. See contact information at the end of the application note. www.austriamicrosystems.com Revision 1.00 3-4 Multi Product - Show Board Application Note Copyright Copyright © 1997-2007, austriamicrosystems AG, Schloss Premstaetten, 8141 Unterpremstaetten, AustriaEurope. Trademarks Registered ®. All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. All products and companies mentioned are trademarks or registered trademarks of their respective companies. Disclaimer Devices sold by austriamicrosystems AG are covered by the warranty and patent indemnification provisions appearing in its Term of Sale. austriamicrosystems AG makes no warranty, express, statutory, implied, or by description regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. Austriamicrosystems AG reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with austriamicrosystems AG for current information. This product is intended for use in normal commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or lifesustaining equipment are specifically not recommended without additional processing by austriamicrosystems AG for each application. For shipments of less than 100 parts the manufacturing flow might show deviations from the standard production flow, such as test flow or test location. The information furnished here by austriamicrosystems AG is believed to be correct and accurate. However, austriamicrosystems AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of austriamicrosystems AG rendering of technical or other services. Contact Information Headquarters austriamicrosystems AG A-8141 Schloss Premstätten, Austria T. +43 (0) 3136 500 0 F. +43 (0) 3136 5692 For Sales Offices, Distributors and Representatives, please visit: http://www.austriamicrosystems.com/contact www.austriamicrosystems.com Revision 1.00 4-4